Home General Larson Storm Door Strike Plate Replacement: A Step-By-Step Guide

Larson Storm Door Strike Plate Replacement: A Step-By-Step Guide

Strikes Plate
Strikes Plate from stormdoorpartswarehouse.com


Storm doors are a great addition to any home, providing protection from the elements while allowing natural light and fresh air to flow into your living space. However, over time, the strike plate on your Larson storm door may become worn out or damaged, compromising its functionality. In this article, we will guide you through the process of replacing the strike plate on your Larson storm door.

Why Replace the Strike Plate?

The strike plate is an essential component of your storm door’s locking system. It ensures a secure fit and prevents the door from swinging open unexpectedly. If your strike plate is damaged or worn out, it may not align properly with the door’s latch, compromising the security and functionality of your storm door.

What You Will Need

Before you begin the replacement process, gather the following tools:

  • Phillips screwdriver
  • Replacement strike plate
  • Tape measure
  • Pencil
  • Drill
  • Chisel

Step-by-Step Guide

Follow these steps to replace the strike plate on your Larson storm door:

Step 1: Remove the Old Strike Plate

Using a Phillips screwdriver, unscrew the screws securing the old strike plate to the door frame. Once removed, set the old strike plate aside.

Step 2: Measure and Mark

Using a tape measure, measure the dimensions of the old strike plate. Transfer these measurements onto the new strike plate using a pencil, ensuring accurate placement.

Step 3: Drill Pilot Holes

Using a drill with a small drill bit, carefully drill pilot holes at the marked locations on the door frame. These pilot holes will guide the screws when attaching the new strike plate.

Step 4: Chisel the Strike Plate Recess

Using a chisel, create a recess in the door frame at the marked location to ensure a flush fit for the new strike plate. Take your time and be careful not to remove too much material.

Step 5: Attach the New Strike Plate

Align the new strike plate with the recess and pilot holes. Secure it in place by driving the screws through the pilot holes and into the door frame using a Phillips screwdriver.

Step 6: Test the Door

Close and latch your storm door to check if the new strike plate aligns properly with the latch. Make any necessary adjustments if the door does not close smoothly or securely.


By following these simple steps, you can easily replace the strike plate on your Larson storm door, restoring its functionality and security. Regularly inspect and maintain your storm door to ensure its longevity and optimal performance.