Storm doors provide an added layer of protection for your home, shielding it from harsh weather elements. Over time, however, the glass on Larson storm doors may become damaged or worn out, requiring replacement. In this article, we will guide you through the process of replacing the glass on your Larson storm door in 2023.
Why Replace Larson Storm Door Glass?
There are several reasons why you might need to replace the glass on your Larson storm door. It could be due to cracks, chips, or fogging, which can negatively impact the aesthetics and functionality of the door. By replacing the glass, you can restore the door’s appearance and ensure optimal performance.
Step 1: Preparation
Before starting the replacement process, gather all the necessary tools and materials. You will need safety glasses, gloves, a tape measure, putty knife, screwdriver, replacement glass, and glazing compound. Make sure to choose the right size and type of glass for your Larson storm door.
Step 2: Remove the Door
To access the glass panel, you need to remove the storm door from its hinges. Open the door fully and use a screwdriver to remove the screws securing the door to the frame. Carefully lift the door off the hinges and place it on a flat, stable surface.
Step 3: Remove the Old Glass
Using a putty knife, carefully remove the glazing compound around the edges of the glass. Take extra caution not to damage the door frame. Once the compound is removed, gently tap the glass to loosen it from the frame. Carefully remove the old glass and discard it properly.
Step 4: Install the New Glass
Measure the dimensions of the opening in the door frame and cut the replacement glass accordingly. Apply a thin layer of glazing compound around the edges of the frame. Carefully insert the new glass into the frame and press it firmly. Ensure that the glass is centered and level.
Step 5: Secure the Glass
Using glazing points or clips, secure the glass to the frame. Place them evenly along the edges, ensuring they hold the glass firmly in place. Use a putty knife to apply a layer of glazing compound over the points or clips, sealing the glass securely in the frame.
Step 6: Reinstall the Door
Lift the storm door and align it with the hinges on the frame. Insert the hinge pins and secure them with screws. Test the door to ensure it opens and closes smoothly. Make any necessary adjustments before tightening the screws completely.
Step 7: Finishing Touches
Inspect the door for any excess glazing compound or debris. Use a clean cloth to wipe away any residue. If desired, you can also paint the glazing compound to match the color of your Larson storm door for a seamless finish.
By following these steps, you can easily replace the glass on your Larson storm door in 2023. Remember to prioritize safety and take your time during the process. If you encounter any difficulties or are unsure about any step, it’s always recommended to seek professional assistance to ensure a successful glass replacement.