How To Install Emco Storm Door

Storm Door Install Page 2 Windows, Siding and Doors Contractor Talk
Storm Door Install Page 2 Windows, Siding and Doors Contractor Talk from


Welcome to our step-by-step guide on how to install an Emco storm door. Storm doors are a great addition to any home as they provide extra insulation, security, and protection against the elements. Installing an Emco storm door may seem like a daunting task, but with the right tools and instructions, it can be a relatively straightforward process. In this article, we will walk you through the installation process, providing helpful tips and insights along the way.

Before You Begin

Before you start installing your Emco storm door, there are a few things you need to consider. Firstly, make sure you have all the necessary tools and materials at hand. These may include a drill, screwdriver, measuring tape, level, and the door itself. It’s also important to read through the manufacturer’s instructions that come with your specific Emco storm door, as they may provide additional guidance or specifications.

Step 1: Measure and Prepare

The first step in installing your Emco storm door is to measure the opening where the door will be installed. Use a measuring tape to determine the width and height of the opening, making sure to account for any trim or molding. Once you have the measurements, you can proceed to prepare the door for installation by removing any packaging materials and assembling any necessary components.

Step 2: Position and Secure the Door

With the door prepared, you can now position it in the opening. Start by placing the door in the opening and ensuring it is centered and level. Use a level to check for any unevenness and make adjustments as needed. Once the door is properly positioned, secure it in place by driving screws into the pre-drilled holes provided by Emco. Make sure to follow the manufacturer’s instructions for the recommended screw placement and quantity.

Step 3: Install the Door Handle and Lock

After securing the door, it’s time to install the handle and lock mechanism. Emco storm doors usually come with a pre-installed handle and lock, but if not, follow the manufacturer’s instructions for proper installation. Use a drill and screwdriver to attach the handle and lock securely to the door, making sure they are aligned and function properly.

Step 4: Adjust and Test

Once the door handle and lock are installed, take a moment to adjust the door’s closing speed and latch position if necessary. Most Emco storm doors come with adjustable features that allow you to fine-tune the door’s operation. Test the door by opening and closing it several times to ensure it operates smoothly and securely.


Installing an Emco storm door can be a rewarding DIY project that enhances your home’s security and energy efficiency. By following the steps outlined in this guide, you can confidently install your Emco storm door and enjoy the benefits it brings. Remember to take your time, read the manufacturer’s instructions, and seek assistance if needed. Good luck with your installation!