2023 Honda Accord Fuel Door Actuator Replacement

New 2023 Honda Accord Coupe New 2022 2023 Honda
New 2023 Honda Accord Coupe New 2022 2023 Honda from 2023-honda.com

2023 Honda Accord Fuel Door Actuator Replacement


The fuel door actuator in your 2023 Honda Accord is responsible for opening and closing the fuel door when you press the button inside your vehicle. Over time, the actuator may wear out or become damaged, leading to issues with the fuel door not opening or closing properly. In this article, we will discuss how to replace the fuel door actuator in your 2023 Honda Accord.

Step 1: Gather the Necessary Tools

Before starting the replacement process, make sure you have all the necessary tools. You will need a screwdriver, pliers, and a replacement fuel door actuator that is compatible with your 2023 Honda Accord model.

Step 2: Disconnect the Battery

For safety reasons, it is important to disconnect the battery before working on any electrical components in your vehicle. Locate the battery in your 2023 Honda Accord and disconnect the negative terminal.

Step 3: Remove the Interior Panel

To access the fuel door actuator, you need to remove the interior panel on the side of the fuel door. Use a screwdriver to remove any screws or clips holding the panel in place. Once the screws/clips are removed, carefully pry off the panel using a flathead screwdriver or a trim removal tool.

Step 4: Locate and Remove the Old Fuel Door Actuator

Once the interior panel is removed, locate the old fuel door actuator. It is usually located near the fuel door release button. Use pliers to disconnect any electrical connectors attached to the actuator. Then, remove the screws holding the actuator in place and carefully remove it from the vehicle.

Step 5: Install the New Fuel Door Actuator

Take the new fuel door actuator and position it in the same location where the old actuator was removed. Secure it with the screws that were previously removed. Reconnect the electrical connectors to the new actuator.

Step 6: Test the Replacement

Before reassembling everything, reconnect the battery and test the replacement. Press the fuel door release button inside your vehicle to check if the new actuator is working properly. The fuel door should open and close smoothly without any issues.

Step 7: Reinstall the Interior Panel

If the replacement is successful, it’s time to reinstall the interior panel. Align the panel with the corresponding slots and press it firmly to secure it in place. Make sure all screws and clips are properly tightened.

Step 8: Reconnect the Battery

Finally, reconnect the negative terminal of the battery. Ensure it is securely attached to avoid any electrical issues.

Step 9: Test the Fuel Door Actuator

After completing the replacement and reassembly process, test the fuel door actuator once again to ensure it is functioning correctly. Open and close the fuel door multiple times to verify its smooth operation.

Step 10: Final Checks

Once you are satisfied with the replacement, do a final check of all connections, screws, and clips to ensure everything is secure. Clean up any tools or debris from the working area, and you’re done!


Replacing the fuel door actuator in your 2023 Honda Accord is a straightforward process that can be done at home with basic tools. By following these steps, you can ensure that your fuel door opens and closes smoothly, restoring the convenience and functionality of your vehicle.